NLHB BEARINGS

Engineering Tool

Fit & Tolerance Calculator

Calculate interference and clearance for shaft and housing fits. Tolerance grades per ISO 286 and GB/T 307.

Input

Bearing size, operating condition and tolerance classes.

Range: d 3–120 mm, D 6–120 mm. Bearing tolerance = normal grade P0 (GB/T 307.1). Light load: P < 0.05C. Normal load: P = 0.05–0.12C. Heavy load: P > 0.12C.

Enter dimensions to calculate fits.

Recommended Shaft and Housing Fits by Bore

Operating conditionBore below 18 mmBore 18–100 mmBore 100–120 mmHousing
Inner ring rotating, light loadjs5js6 (j6)k6H7
Inner ring rotating, normal loadjs5 or js6k5 or k6m5 or m6H7
Electric motor, deep groove ball bearingjs5 (j5), up to 18 mmk5m5H6 or H7 if the outer ring must slide; JS6 or JS7 if not
Inner ring rotating, heavy loadNo general valuen6 from 50 mm; clearance above CNn6; clearance above CNH7
Inner ring rotating, hot shaftAs normal loadAs normal loadAs normal loadG7
Outer ring rotatingg6 if the inner ring must slide; h6 if notSameSameM7 light load; N7 normal or heavy load

General values from published bearing catalogues, for ball bearings of normal or class 6 precision, solid steel shafts and cast iron or steel housings. Hollow shafts, thin-walled housings and light-alloy housings need tighter fits. Confirm on your own parts.

Standards used: ISO 286 / GB/T 1800.1-2020 (shaft and housing tolerance classes). Bearing bore and outer diameter tolerances per GB/T 307.1 normal grade (P0). For the inner ring, a positive result is interference. For the outer ring, a positive result is clearance.
How to choose a fit: use the working condition selector above.

Read the guide

Inquiry List 0

Your Inquiry List

Submit All as Quote →