Engineering Reference
Reference vibration acceleration levels for deep groove ball bearings by bore diameter. Compare Z1–Z4 quality grades per JB/T 7047.
Values in dB (acceleration base). Per JB/T 7047 / industry reference. Select a grade above to filter.
| Bore diameter (mm) | Z1 (dB) | Z2 (dB) | Z3 (dB) | Z4 (dB) |
|---|
Vibration grades classify bearing noise by acceleration level. Z1 is basic quality; Z4 is for noise-critical applications like precision motors, medical devices, and audio equipment.
Z1/Z2: general motors, fans, pumps, household appliances.
Z3: precision motors, air conditioners, automotive.
Z4: instruments, medical, aerospace, audio.
Surface roughness of raceways, ball roundness, cage design, cleanliness, lubricant type, and internal clearance. Tighter clearance (C2) often reduces noise but increases heat.
Bearing vibration is measured using an accelerometer mounted on the outer ring while the inner ring rotates at a defined speed. Three frequency bands are evaluated:
The overall acceleration level (dB) shown in the table is the JB/T 7047 acceptance criterion (for three-band velocity grades V1–V4, see our BVT V1–V4 vs Z1–Z4 guide). NLHB tests batches on in-house S910 equipment and provides inspection records on request.