BEVELLING MACHINE BEARINGS

Pipe Bevelling Machine Bearings

Pipe bevelling and chamfering machines use sealed roller bearings. When an imported machine needs spares, we make the bearing from the old part number or a sample. This page lists the bevelling machine bearings we make.

Typical applications: portable pipe bevelling machines, plate edge bevellers and chamfering machines.

Request a quote for bevelling machine bearings

3 models3 size rows

Closures

Series or suffix	Outer profile and use	Example
2RS	Rubber seals on both sides, against chips and dust	V5200-2RS = 11 × 38 × 12

Bevelling machine bearing sizes

Each row is one size. Models that share the size are listed together and link to their model pages, where profile drawings and load ratings are given. Dimensions are in millimetres. Rollers with the same d × D × B can still have different profiles.

Bevelling machine bearings

d	D	B	Models
9.525	30.8	11.1	4000TNFB-2RS
11	38	12	V5200-2RS
20	56.5	20.6	4002TNFB-2RS

Dimensions are the same as on each model page.

Selection checks for track rollers

Start from the rail. Confirm groove angle or radius and the rolling-contact diameter before you compare model numbers.
Do not select a roller from OD and width alone. Two rollers with the same envelope can touch the rail at different points.
Decide how clearance or preload is set. A concentric roller gives the fixed datum. An eccentric mounting element adjusts the clearance.
Choose shields or seals by dirt, chips, coolant and speed. A seal is not always an upgrade, because it adds friction.

Spares made to sample

Send the old bearing, a photo of the markings or the machine model. We measure bore, outside diameter, width and outer profile and make the same bearing. Other sizes and seals are made to drawing.

Frequently asked questions

What should I measure on an old roller?

Measure bore, outside diameter and width, and record the outer profile, any groove angle or radius, the closure and the markings. A photo of the rail helps.

LV V-groove track rollers →Track roller series guide: SG, LFR, LV, VW →Choosing a track roller by rail profile →Eccentric track rollers and preload →Custom and polyurethane track rollers →All track roller bearings →