Same bore, six series
At a 25 mm bore the series give a range of outside diameters and widths. A larger section carries more load but needs more space. The section height is (D − d) / 2.
| Model | Series | d | D | B | Section height |
|---|
| 6005 | 6000 | 25 | 47 | 12 | 11 |
| 6205 | 6200 | 25 | 52 | 15 | 13.5 |
| 6305 | 6300 | 25 | 62 | 17 | 18.5 |
| 6405 | 6400 | 25 | 80 | 21 | 27.5 |
| 62205 2RS | 62200 | 25 | 52 | 18 | 13.5 |
| W6205 | W6200 | 25 | 52 | 20.62 | 13.5 |
How 6000, 6200 and 6300 numbers are built
| Number or suffix | Meaning | Example |
|---|
| Last two digits | 00 = 10 mm, 01 = 12 mm, 02 = 15 mm, 03 = 17 mm. From 04 up, bore = code × 5. | 6205 = 25 × 52 × 15 |
| 622xx / 623xx | Same bore and OD as 62xx / 63xx, wider rings | 62205 2RS = 25 × 52 × 18 |
| ZZ / 2RS / 2RZ | Metal shields / contact rubber seals / non-contact rubber seals | 6205 ZZ, 6205 2RS |
62200 and 62300 size charts
Each row is one size. Open, shielded, sealed and snap-ring versions of the same size are listed together and link to their model pages, where load ratings and drawings are given. Dimensions are in millimetres.
62200 series (wide)
62300 series (wide)
Dimensions are the same as on each model page. Where a shielded or sealed version is wider than the open one, it is listed in its own row.
Choosing between the series
- Start from the shaft diameter, then choose the lightest series that carries the load for the required life. Check the load rating on the model page.
- Use ZZ shields for low friction in clean places, 2RS seals where dust or water is the main risk, and 2RZ seals for a middle course with less friction than 2RS.
- Choose the wide 622xx, 623xx or W62xx versions when the housing allows more width. The wider ring leaves more room for seals and grease.
- With a heavy interference fit or a warm running shaft, the internal clearance shrinks. Consider C3 clearance and state it in the order.
Custom deep groove bearings
We also make non-catalog bores, widths and outside diameters to drawing, and special clearance, seals, grease and cages. Send d, D, B, seal type, clearance, speed and quantity. We check whether a catalog size fits first.
Frequently asked questions
Is a 62205 2RS interchangeable with a 6205 2RS?
They share bore and outside diameter, but the 62205 is 18 mm wide instead of 15 mm. It fits only where the housing has room for the extra width.
What is the difference between 6200 and 6300 bearings?
They share the bore for the same last two digits. A 6300 bearing has a larger outside diameter and width than a 6200, so it carries more load and needs more space.
Related pages
