6200 Series Bearing Size Chart: 62xx Deep Groove Ball Bearings

Same bore, six series

At a 25 mm bore the series give a range of outside diameters and widths. A larger section carries more load but needs more space. The section height is (D − d) / 2.

Model	Series	d	D	B	Section height
6005	6000	25	47	12	11
6205	6200	25	52	15	13.5
6305	6300	25	62	17	18.5
6405	6400	25	80	21	27.5
62205 2RS	62200	25	52	18	13.5
W6205	W6200	25	52	20.62	13.5

How 6000, 6200 and 6300 numbers are built

Number or suffix	Meaning	Example
60xx / 62xx / 63xx / 64xx	Light / medium-light / medium / heavy series at the same bore	6005, 6205, 6305
Last two digits	00 = 10 mm, 01 = 12 mm, 02 = 15 mm, 03 = 17 mm. From 04 up, bore = code × 5.	6205 = 25 × 52 × 15
60x / 62x / 63x	One digit after the series: bore in mm (miniature sizes)	608 = 8 × 22 × 7
ZZ / 2RS / 2RZ	Metal shields / contact rubber seals / non-contact rubber seals	6205 ZZ, 6205 2RS
N / NR	Snap-ring groove in the outer ring / groove with snap ring fitted	60/28N, 60/28NR

6200 series size chart

Each row is one size. Open, shielded, sealed and snap-ring versions of the same size are listed together and link to their model pages, where load ratings and drawings are given. Dimensions are in millimetres.

6200 series (incl. 62x miniature)

d	D	B	Models
3	10	4	623
4	13	5	624 624ZZ1
5	16	5	625 625 2RS 625 2RZ 625DD 625E 625VV 625ZZ1
6	19	6	626 626 2RS 626 2RZ 626DD 626VV 626ZZ1
7	22	7	627 627 2RS 627 2RZ 627DD 627VV 627ZZ1
8	24	8	628 628 2RS 628 2RZ 628DD 628VV
9	26	8	629 629DD 629VV
9	36	8	629 2RS 629 2RZ
10	30	9	6200 6200 2RS 6200 2RZ 6200 ZZ
12	32	10	6201 6201 2RS 6201 2RZ 6201 ZZ
15	35	11	6202 6202 2RS 6202 2RZ 6202 ZZ
17	40	12	6203 6203 2RS 6203 2RZ 6203 ZZ
20	47	14	6204 6204 2RS 6204 2RZ 6204 ZZ
22	50	14	62-22 62-22 2RZ 62-22 ZZ 62-222RS 62/22
25	52	15	6205 6205 2RS 6205 2RZ 6205 ZZ 6205N 6205NR
28	58	16	62-28 62-28 2RS 62-28 2RZ 62-28 ZZ 62-28N 62-28NR 62/28
30	62	16	6206 6206 2RS 6206 2RZ 6206 ZZ 6206N 6206NR
32	65	17	62-32 62-32 2RS 62-32 2RZ 62-32 ZZ 62-32N 62-32NR 62/32
35	72	17	6207 6207 2RS 6207 2RZ 6207 ZZ 6207N 6207NR
40	80	18	6208 6208 2RS 6208 2RZ 6208 ZZ 6208N 6208NR
45	85	19	6209 6209 2RS 6209 2RZ 6209 ZZ 6209N 6209NR
50	90	20	6210 6210 2RS 6210 2RZ 6210 ZZ 6210N 6210NR
55	100	21	6211 6211 2RS 6211 2RZ 6211 ZZ 6211N 6211NR
60	110	22	6212 6212 2RS 6212 2RZ 6212 ZZ 6212N 6212NR
65	120	23	6213 6213 2RS 6213 2RZ 6213 ZZ 6213N 6213NR
70	125	24	6214 6214 2RS 6214 2RZ 6214 ZZ 6214N 6214NR
75	130	25	6215 6215 2RS 6215 2RZ 6215 ZZ 6215N 6215NR
80	140	26	6216 6216 2RS 6216N 6216NR 6216ZZ
85	150	28	6217 6217 2RS 6217N 6217NR 6217ZZ
90	160	30	6218 6218 2RS 6218N 6218NR 6218ZZ
95	170	32	6219 6219 2RS 6219N 6219NR 6219ZZ
100	180	34	6220 6220 2RS 6220ZZ
105	190	36	6221 6221 2RS 6221ZZ

Dimensions are the same as on each model page. Where a shielded or sealed version is wider than the open one, it is listed in its own row.

Choosing between the series

Start from the shaft diameter, then choose the lightest series that carries the load for the required life. Check the load rating on the model page.
Use ZZ shields for low friction in clean places, 2RS seals where dust or water is the main risk, and 2RZ seals for a middle course with less friction than 2RS.
Choose the wide 622xx, 623xx or W62xx versions when the housing allows more width. The wider ring leaves more room for seals and grease.
With a heavy interference fit or a warm running shaft, the internal clearance shrinks. Consider C3 clearance and state it in the order.

Custom deep groove bearings

We also make non-catalog bores, widths and outside diameters to drawing, and special clearance, seals, grease and cages. Send d, D, B, seal type, clearance, speed and quantity. We check whether a catalog size fits first.

Frequently asked questions

What are the dimensions of a 6205 bearing?

A 6205 bearing is 25 mm mm × 52 × 15 mm (bore × OD × width). The ZZ and 2RS versions have the same dimensions.

What is the difference between 6200 and 6300 bearings?

They share the bore for the same last two digits. A 6300 bearing has a larger outside diameter and width than a 6200, so it carries more load and needs more space.

Is a 62205 2RS interchangeable with a 6205 2RS?

They share bore and outside diameter, but the 62205 is 18 mm wide instead of 15 mm. It fits only where the housing has room for the extra width.

6000 series size chart →6300 series size chart →6000, 6200, 6300 and wide series in one table →6200 bearing dimensions →Deep groove ball bearing series guide →Precision deep groove ball bearings P4, P5, P6 →Thin-section bearings 6700, 6800, 6900, 16000 →All deep groove and miniature bearings →

6200 Series Deep Groove Ball Bearings: Size Chart