Small bearings for motors, instruments, 3D printers, gimbals, dental handpieces and other compact mechanisms. This page brings our miniature size charts and selection guides together. Pick a series below.
Metric miniature deep groove bearings with a thinner section than the 6xx sizes of the same bore. 83 MR models.
Size chart →A thin flange on the outer ring locates the bearing axially, so the housing needs only a straight bore. 716 flanged models.
Size chart →One digit after the series is the bore in mm, for example 608 = 8 × 22 × 7. Listed on the 6000, 6200 and 6300 pages.
Size chart →The 681–689 and 691–699 sizes are listed with the 6800 and 6900 thin-section series.
Size chart →Bores and ODs in fractions of an inch, for machines designed in the US or UK. 198 inch models.
Size chart →Double-row angular contact sizes from a 5 mm bore, where two miniature bearings side by side would otherwise be used.
Size chart →Rings in chrome or stainless steel, with steel or silicon nitride ceramic balls, steel or nylon cages and precision up to P4. Each size can be supplied open, with ZZ metal shields or with 2RS rubber seals where the model page lists them.
Non-catalog bores, widths, flanges, clearance and grease can be made to drawing. Send d, D, B, the flange size if any, seal type, speed and quantity. We check whether a catalog size fits first.
Miniature and flanged ball bearing size chart (PDF). More files in the download center.
At the same bore an MR bearing has a thinner section, so it fits where radial space is very tight. A 6xx bearing of the same bore is larger and carries more load.
Use a flanged bearing when you want the housing to be a straight through-bore. The flange sits against the housing face and locates the bearing axially.
Yes. The R series and 1600 series are inch sizes for machines designed in the US or UK. All sizes on our pages are given in millimetres.