NLHB
BEARINGS
SOURCING

What to Prepare Before Requesting a Custom Bearing Quote

4 min read · Updated 2026 · By NLHB Sales Team

Custom bearing quotes take longer than standard ones — but most of the delay comes from missing information, not manufacturing. If you prepare the items on this checklist before you inquire, you'll get a real quote in days, not weeks of back-and-forth.

The 6 things we need to quote a custom bearing

1. A drawing or sample

This is non-negotiable for custom work. Ideally a dimensional drawing (PDF, DWG, or DXF) showing tolerances. If you don't have a drawing, a sample bearing we can reverse-engineer works too. Photos alone are not enough — we need to measure.

2. The operating environment

Tell us where the bearing runs:

3. Quantity and annual demand

Custom tooling cost is amortized over volume. "One prototype" and "10,000 units per year" produce very different quotes. Be honest about your real demand — we won't oversell you, but we need the number to recommend the right manufacturing route.

4. Precision and tolerance requirements

If you don't specify, we'll quote standard ABEC-1 (P0). If you need P6, P5 or higher, tell us up front — tighter tolerances mean different grinding passes and different costs.

5. Material and heat treatment

Standard bearing steel (GCr15 / SAE 52100) covers 90% of applications. Stainless steel (AISI 440C, AISI 304) is needed for food, marine or chemical exposure. Special alloys (ceramic hybrid, through-hardened tool steel) are for high-temperature or extreme-load cases. If you don't know, tell us the application — we'll recommend.

6. Your timeline

When do you need samples? When do you need the first production batch? Custom bearings typically run 4-8 weeks for first article, plus production time. If you have a hard deadline, tell us — we'll tell you honestly whether we can hit it.

What you don't need to provide

What slows quotes down

The most common delay patterns we see:

The fastest way to start

Fill out our quote request form with as much detail as you have. If you're missing something, we'll ask. If you have a drawing or sample to share, mention it in the message field and we'll send upload instructions.

Rule of thumb: the more detail you give us on the first email, the faster you get a real quote. Vague inquiries get vague responses — and neither of us wants that.

Need a quote or technical review for your application?

Send us your part number, dimensions or drawing. We verify the spec, check supply, and quote against confirmed requirements.

Request a Quote
Inquiry List 0

Your Inquiry List

Submit All as Quote →