NLHB BEARINGS
Request Quote
Home/Products/Inch R Series/R1810 2rs
Inch R SeriesDeep Groove Ball BearingsSealed

R1810 2rs

d 7.938 × D 12.7 × B 3.967 mm

The R1810 2rs is a deep groove ball bearing with bore 7.938mm, outer diameter 12.7mm, and width 3.967mm rated for dynamic load 0.5 kN.

Request Quote for R1810 2rsSearch Similar
NOMINAL DIMENSION DRAWINGD = 12.7 mmd = 7.938 mmB = 3.967 mmNLHB BEARINGSR1810 2rs7.938 × 12.7 × 3.967 mmNOMINAL DIMENSIONS • TOLERANCE AND SUPPLY CONFIRMED PER INQUIRY
R1810 2rs · 7.938x12.7x3.967 mm

📋 Technical Specifications

Bore (d)
7.938mm
Outer Dia. (D)
12.7mm
Width (B)
3.967mm
Dynamic Load (Cr)
0.46 kN(463 N)
Static Load (C0r)
0.22 kN(223 N)
Reference Speed
40000rpm
Bearing typeDeep Groove Ball Bearings
SeriesInch R Series
Seal typeSealed
MaterialConfirmed per inquiry — grade and certificate availability reviewed before quotation
Bore typeConfirmed per drawing
Dimension unitmillimeter (mm)

📋 Nominal Variants by Seal Type

Catalog variants open a detail page. Inquiry-only configurations go directly to RFQ.

Seal TypeModel CodeTypical Use
OpenR1810High speed in clean environmentsQuote →
Double metal shieldsR1810 ZZGeneral dust protectionQuote →
Double contact rubber sealsR1810 2RS (inquiry only)Dust and moisture protection at moderate speedQuote →
Double non-contact rubber sealsR1810 2RZ (inquiry only)Lower-friction sealing at higher speedQuote →
C3 radial clearanceR1810 C3 (inquiry only)Motors and applications with higher operating temperatureQuote →

📐 Detailed Dimensions

Basic dimensions (mm)

Bore diameter (d)7.938
Outer diameter (D)12.7
Width (B)3.967

Corner radius, shoulder dimensions, fits and tolerances are confirmed against the requested suffix and application drawing before quotation.

📑 Drawings & 3D Model

R1810 2rs bearing dimension drawing, 7.938 x 12.7 x 3.967 mm
R1810 2rs dimension drawing: bore d 7.938 mm × outer diameter D 12.7 mm × width B 3.967 mm. Tolerance class ABEC-1 (P0). Internal design is shown schematically.
📑
2D Drawing (PDF)
Download PDF →
📐
2D DXF File
Request DXF →
📅
3D STEP Model
Request STEP →

The PDF drawing is free to download. DXF and 3D STEP files are sent on request: tell us the model and your application, and we reply with the CAD files.

⚡ Source-Data Reference Speed

Catalog reference
40,000 rpm

Lubrication method and application speed limit are confirmed per inquiry; no oil-speed value is derived from this number.

⇄ Same-size Bearings & Reference Options

The models below share the 7.938x12.7x3.967 mm boundary dimensions. Matching d/D/B alone does not prove interchangeability; verify seals, clearance, ring features, load ratings, fits, and application conditions before replacement.

ModelRelationshipSeriesSealAction
FR1810ZZSame boundary dimensions — verify fit/loadMR Miniature SeriesShieldedQuote →
R1810Configuration variantMR Miniature SeriesOpenQuote →
R1810 ZZConfiguration variantExtra Small / Miniature Deep Groove Ball Bearing Inch SeriesMetal ShieldsQuote →
RW1810Same boundary dimensions — verify fit/loadInch RW SeriesOpenQuote →
RW1810zzSame boundary dimensions — verify fit/loadInch RW SeriesShieldedQuote →

⚙ Typical Applications

Electric motors
Fans and blowers
Pumps
Household appliances
Power tools
Office equipment
General machinery

Why choose NLHB?

NLHB supports both in-house manufacturing and qualified partner sourcing. We confirm the specification, supply route, inspection requirements, and available documentation before quotation.

About NLHB →
4,300+
Models
15+
Years
RFQ
Specification Confirmed

❓ Frequently Asked Questions

What are the dimensions of R1810 2rs?
The R1810 2rs bearing has bore (d) = 7.938 mm, outer diameter (D) = 12.7 mm, and width (B) = 3.967 mm.
Is there a R1810 2rs drawing or CAD file?
Yes. The R1810 2rs dimension drawing (PDF) is free to download on this page. DXF and 3D STEP files are sent on request: tell us the model and your application.
What is the load rating of R1810 2rs?
Dynamic load rating (Cr) = 0.46 kN (463 N), static load rating (C0r) = 0.22 kN.
What tolerance class is the R1810 2rs?
The standard tolerance class of the R1810 2rs is ABEC-1 (P0) per GB/T 307.1, unless otherwise agreed.
What bearing series does R1810 2rs belong to?
The R1810 2rs belongs to the Inch R Series within the Deep Groove Ball Bearings category.
Can NLHB supply R1810 2rs equivalents from other brands?
Depending on the model and order requirements, NLHB may manufacture in-house or source through qualified partner factories. Interchange and supply route are confirmed against your specification before quotation. All trademarks belong to their respective owners.
How do I order R1810 2rs from NLHB?
Click "Request Quote" and send us your quantity, application, and required specifications. We review the specification, supply route, lead time, and pricing before issuing a quotation. Response time depends on specification complexity.
What materials are available for R1810 2rs?
Material grade is confirmed per inquiry. Availability depends on the model, quantity, application, and whether the order is manufactured in-house or sourced through a qualified partner factory. Material certificates or inspection documents are confirmed before quotation when required.

Get a quote for R1810 2rs

Send us your quantity, application and target lead time. We confirm spec, interchange and realistic delivery — no order confirmed until you approve.

Request Quote →
Inquiry List 0

Your Inquiry List

Submit All as Quote →