The MR95 ZZ is a deep groove ball bearing with bore 5mm, outer diameter 9mm, and width 3mm rated for dynamic load 0.4 kN.
| Bearing type | Deep Groove Ball Bearings |
| Series | MR |
| Seal type | Metal Shields |
| Material | Confirmed per inquiry — grade and certificate availability reviewed before quotation |
| Bore type | Confirmed per drawing |
| Dimension unit | millimeter (mm) |
What each part of MR95 ZZ means.
| MR | MR = miniature bearing |
Catalog variants open a detail page. Inquiry-only configurations go directly to RFQ.
| Seal Type | Model Code | Typical Use | |
|---|---|---|---|
| Open | MR95 | High speed in clean environments | Quote → |
| Double contact rubber seals | MR95 2RS (inquiry only) | Dust and moisture protection at moderate speed | Quote → |
| Double non-contact rubber seals | MR95 2RZ (inquiry only) | Lower-friction sealing at higher speed | Quote → |
| C3 radial clearance | MR95 C3 (inquiry only) | Motors and applications with higher operating temperature | Quote → |
| Bore diameter (d) | 5 |
| Outer diameter (D) | 9 |
| Width (B) | 3 |
Corner radius, shoulder dimensions, fits and tolerances are confirmed against the requested suffix and application drawing before quotation.
Drawings and 3D models are provided per inquiry. Tell us your application and we will send the appropriate file format (DXF, DWG, STEP, IGES).
Lubrication method and application speed limit are confirmed per inquiry; no oil-speed value is derived from this number.
The models below share the 5x9x3 mm boundary dimensions. Matching d/D/B alone does not prove interchangeability; verify seals, clearance, ring features, load ratings, fits, and application conditions before replacement.
| Model | Relationship | Series | Seal | Action |
|---|---|---|---|---|
| FMR95 | Different outer-ring feature | Flanged Thin-Section Bearings | Open | Quote → |
| MF95 | Different outer-ring feature | Extended Inner-Ring Flanged Bearings | Shielded | Quote → |
| MF95 2rs | Same boundary dimensions — verify fit/load | MF95 | Sealed | Quote → |
| MF95 ZZ | Same boundary dimensions — verify fit/load | MF95 | Metal Shields | Quote → |
| MF95ZZ | Same boundary dimensions — verify fit/load | MR Miniature Series | Shielded | Quote → |
| MR95 | Configuration variant | MR Miniature Series | Sealed | Quote → |
| MR95 2rs | Configuration variant | MR | Sealed | Quote → |
| MR95zz | Configuration variant | MR | Shielded | Quote → |
| MR95ZZ1 | Same boundary dimensions — verify fit/load | MR Miniature Series | Open | Quote → |
| SMF95 | Different outer-ring feature | Extended Inner-Ring Flanged Bearings | Shielded | Quote → |
| SMF95 2rs | Same boundary dimensions — verify fit/load | SMF95 | Sealed | Quote → |
| SMF95zz | Same boundary dimensions — verify fit/load | SMF95 | Shielded | Quote → |
NLHB supports both in-house manufacturing and qualified partner sourcing. We confirm the specification, supply route, inspection requirements, and available documentation before quotation.
About NLHB →Send us your quantity, application and target lead time. We confirm spec, interchange and realistic delivery — no order confirmed until you approve.
Request Quote →