NLHB BEARINGS
Request Quote
Home/Products/MR/MR84 ZZ
MRDeep Groove Ball BearingsMetal Shields

MR84 ZZ

d 4 × D 8 × B 3 mm

The MR84 ZZ is a deep groove ball bearing with bore 4mm, outer diameter 8mm, and width 3mm rated for dynamic load 0.4 kN.

Request Quote for MR84 ZZSearch Similar
NOMINAL DIMENSION DRAWINGD = 8 mmd = 4 mmB = 3 mmNLHB BEARINGSMR84 ZZ4 × 8 × 3 mmNOMINAL DIMENSIONS • TOLERANCE AND SUPPLY CONFIRMED PER INQUIRY
MR84 ZZ · 4x8x3 mm

📋 Technical Specifications

Bore (d)
4mm
Outer Dia. (D)
8mm
Width (B)
3mm
Dynamic Load (Cr)
0.40 kN(395 N)
Static Load (C0r)
0.14 kN(139 N)
Reference Speed
56000rpm
Bearing typeDeep Groove Ball Bearings
SeriesMR
Seal typeMetal Shields
MaterialConfirmed per inquiry — grade and certificate availability reviewed before quotation
Bore typeConfirmed per drawing
Dimension unitmillimeter (mm)

🔐 Model Code Breakdown

What each part of MR84 ZZ means.

MR
Miniature
MRMR = miniature bearing

📋 Nominal Variants by Seal Type

Catalog variants open a detail page. Inquiry-only configurations go directly to RFQ.

Seal TypeModel CodeTypical Use
OpenMR84High speed in clean environmentsQuote →
Double contact rubber sealsMR84 2RS (inquiry only)Dust and moisture protection at moderate speedQuote →
Double non-contact rubber sealsMR84 2RZ (inquiry only)Lower-friction sealing at higher speedQuote →
C3 radial clearanceMR84 C3 (inquiry only)Motors and applications with higher operating temperatureQuote →

📐 Detailed Dimensions

Basic dimensions (mm)

Bore diameter (d)4
Outer diameter (D)8
Width (B)3

Corner radius, shoulder dimensions, fits and tolerances are confirmed against the requested suffix and application drawing before quotation.

📑 Drawings & 3D Model

MR84 ZZ bearing dimension drawing, 4 x 8 x 3 mm
MR84 ZZ dimension drawing: bore d 4 mm × outer diameter D 8 mm × width B 3 mm. Tolerance class ABEC-1 (P0). Internal design is shown schematically.
📑
2D Drawing (PDF)
Download PDF →
📐
2D DXF File
Request DXF →
📅
3D STEP Model
Request STEP →

The PDF drawing is free to download. DXF and 3D STEP files are sent on request: tell us the model and your application, and we reply with the CAD files.

⚡ Source-Data Reference Speed

Catalog reference
56,000 rpm

Lubrication method and application speed limit are confirmed per inquiry; no oil-speed value is derived from this number.

⇄ Same-size Bearings & Reference Options

The models below share the 4x8x3 mm boundary dimensions. Matching d/D/B alone does not prove interchangeability; verify seals, clearance, ring features, load ratings, fits, and application conditions before replacement.

ModelRelationshipSeriesSealAction
MF84 2rsSame boundary dimensions — verify fit/loadMF84SealedQuote →
MF84 ZZSame boundary dimensions — verify fit/loadMF84Metal ShieldsQuote →
MR84Configuration variantMR Miniature SeriesSealedQuote →
MR84 2rsConfiguration variantMRSealedQuote →
SMF84 2rsSame boundary dimensions — verify fit/loadSMF84SealedQuote →
SMF84zzSame boundary dimensions — verify fit/loadSMF84ShieldedQuote →

🔄 Related Models

Same bearing family or similar dimensions.

Similar size — reference only, verify all interfaces
FMR84
4x8x4 mm
Flanged Thin-Section Bearings
B +1.0mm
MF84
4x8x2 mm
Extended Inner-Ring Flanged Bearings
B -1.0mm
SMF84
4x8x2 mm
Extended Inner-Ring Flanged Bearings
B -1.0mm

⚙ Typical Applications

Electric motors
Fans and blowers
Pumps
Household appliances
Power tools
Office equipment
General machinery

Why choose NLHB?

NLHB supports both in-house manufacturing and qualified partner sourcing. We confirm the specification, supply route, inspection requirements, and available documentation before quotation.

About NLHB →
4,300+
Models
15+
Years
RFQ
Specification Confirmed

❓ Frequently Asked Questions

What are the dimensions of MR84 ZZ?
The MR84 ZZ bearing has bore (d) = 4 mm, outer diameter (D) = 8 mm, and width (B) = 3 mm.
Is there a MR84 ZZ drawing or CAD file?
Yes. The MR84 ZZ dimension drawing (PDF) is free to download on this page. DXF and 3D STEP files are sent on request: tell us the model and your application.
What is the load rating of MR84 ZZ?
Dynamic load rating (Cr) = 0.40 kN (395 N), static load rating (C0r) = 0.14 kN.
What tolerance class is the MR84 ZZ?
The standard tolerance class of the MR84 ZZ is ABEC-1 (P0) per GB/T 307.1, unless otherwise agreed.
What bearing series does MR84 ZZ belong to?
The MR84 ZZ belongs to the MR within the Deep Groove Ball Bearings category.
Can NLHB supply MR84 ZZ equivalents from other brands?
Depending on the model and order requirements, NLHB may manufacture in-house or source through qualified partner factories. Interchange and supply route are confirmed against your specification before quotation. All trademarks belong to their respective owners.
How do I order MR84 ZZ from NLHB?
Click "Request Quote" and send us your quantity, application, and required specifications. We review the specification, supply route, lead time, and pricing before issuing a quotation. Response time depends on specification complexity.
What materials are available for MR84 ZZ?
Material grade is confirmed per inquiry. Availability depends on the model, quantity, application, and whether the order is manufactured in-house or sourced through a qualified partner factory. Material certificates or inspection documents are confirmed before quotation when required.

Get a quote for MR84 ZZ

Send us your quantity, application and target lead time. We confirm spec, interchange and realistic delivery — no order confirmed until you approve.

Request Quote →
Inquiry List 0

Your Inquiry List

Submit All as Quote →